Gamo PT-80 User Manual download pdf (Page 9)

LOADING AMMUNITION

LOADING AMMUNITION FOR FIRING IN SEMI-AUTOMATIC MODE

WARNING: Before loading or firing for the first time, check that there are no

obstructions in the barrel by passing a cleaning rod through it. Do this by following

instructions a and b in the previous section.

To load the pistol, APPLY the safety catch (fig. A) and carry out the following steps (fig. B):

a. Push the bolt forward (1), the handle for which is located on both sides of the

barrel, and open the top cover (2).

b. Remove the rotary magazine (3) (fig. B).

c. Insert 8 flat headed pellets in the 8 holes in the magazine (fig. B) with the pellet

head foremost until the pellet skirts are flush with the edge of the magazine. Check

that no pellets are sticking out.

d. Replace the magazine (3) in place, making sure that it goes to the bottom of its slot

and that the locating sear engages with one of the cogs on the outside of the

magazine.

e. Close the top cover (2), making sure that it is held in place.

English

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

No comments

Gamo PT-80 User Manual Page 9